CR10 Cluster Remover CR10 Cluster Remover CR10 Cluster Remover - Showing Milking Time in Automatic Mode CR10 Cluster Remover - Showing Milking Time in Manual Mode CR10 Cluster Remover - Showing Washing Time Elapsed CR10 Cluster Remover - Showing Washing Time Remaining CR10 Cluster Remover - Showing Washing Screen

CR10 Cluster Remover

The CR10 cluster remover is one of the most useful additions to a milking parlour.

They allow the operator to reduce milking times and improve teat health by automating the removal of the milking cluster from the animals.

They can be used on cow, goat and sheep parlours.

Download leaflet

Automation for Cows CR10 Cluster Remover

The CR10 cluster remover is an entry level system with flow and time-based removal.

Control Features:

  • Simple numeric display of milking time (minutes:seconds)
  • 3 keys - automatic milking, manual milking and wash
  • Simple, bright LCD display
  • 2 automatic milking modes - 1 time-based cluster removal and 1 sensor-based cluster removal
  • Time-based cluster removal does not require a sensor
  • Accurate milk flow measurement for ACR timing
  • User programmable wash time
  • User selectable ACR pull off resistance and time
  • Automatic idle after user selectable period of inactivity
  • Milk sweep / purge
  • Small form factor, allowing for easy installation into existing parlours
  • Suitable for all herd sizes (small or large)
  • Can be retrofitted into abreast, herringbone or rotary parlours

Sensor Features:

  • Free-flowing sensor incorporating shut-off valve
  • The tangential entry and the wide discharge tube allow smooth passage and evacuation of high milk flows
  • The sensor shape reduces vacuum fluctuations
  • The diaphragm shape is designed to prevent accidental closure and allow rapid response, facilitating instant detachment of the milking unit
  • Swirl effect on inside surfaces of sensor induces effective washing
  • The vacuum nipple can be positioned in any direction
  • Milk inlet and outlet nipples - 21mm x 16mm